Waiting chair (3-seater)

Model: VOUJD001 Specifications: 1800*650*860

Online Message 3D Showcase

电子邮件: 443050137@qq.com

Description

- Commodity name: Waiting chair (3-seater)
Model: VOUJD001 Specifications: 1800*650*860

1. Material: ① Crossbeam: Aluminum alloy tubing.
② Seat surface, chair seat, chair back: 100% polyurethane (PU) material, integrally molded.
③ Armrests, chair legs, stool legs: Aluminum alloy.
2. Technical parameters: 1. Crossbeam: Testing standards comply with QB/T 3832-1999 "Evaluation of Corrosion Test Results for Metal Coatings of Light Industry Products" and QB/T 3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers of Light Industry Products - Neutral Salt Spray Test (NSS)" requirements: ① Uses high-strength premium aluminum alloy tubing sized 118mm*118mm with a wall thickness of 2.5mm; ② Metal parts have a neat coating on the tubing surface with no welding points; ③ The metal coating has physical and chemical properties resistant to salt spray with no rust spots; ④ Metal surface corrosion resistance test with continuous neutral salt spray for 580 hours, the corrosion resistance rating of the coating itself and the protection level of the coating to the substrate both reach level 10.
2. Seat: Test results comply with GB/T 3325-2017 "General Technical Conditions for Metal Furniture", QB/T 1951.2-2013 "Metal Furniture Quality Inspection and Quality Evaluation", QB/T 4767-2014 "Steel Components for Furniture", QB/T 2904-2007 "Self-Skinning Rigid Polyurethane Foam", GB 8624-2012 "Classification of Combustion Performance of Building Materials and Products", GB/T 231.1-2018 "Metal Materials Brinell Hardness Test Part 1: Test Method", GB/T 228.1-2021 "Metal Materials Tensile Test Part 1: Room Temperature Test Method", GB/T 10357.3-2013 "Furniture Mechanical Performance Test Part 3: Strength and Durability of Chairs and Stools" standards.
3. Structure and material of stool surface, chair seat, and chair back: Uses an integrally molded one-piece design (i.e., the chair seat and back are molded together in the same mold by pressure casting, without separate assembly or external cushions). Inside is a high-strength steel frame welded into shape, overall molded with 100% polyurethane (PU) material. The entire seat is fully wrapped in PU, with a smooth front surface free of any uneven seams, easy to clean without special cleaners, simple and firm installation, and multiple chair surface color options available. Polyurethane PU (seat and back) test results comply with GB/T 32487-2016 "General Technical Conditions for Plastic Furniture", QB/T 4371-2012 "Evaluation of Antibacterial Performance of Furniture", and GB/T 31402-2015 "Test Methods for Antibacterial Performance of Plastic Surfaces" standards.
4. Armrests and chair legs, stool legs: All made of high-quality aluminum alloy die-cast, with electrostatic powder coating on the surface. Each set of stool legs and chair legs is configured in quantity and specifications to ensure the stability and sturdiness of the seat; single rod structure without multi-rod assembly or any form of jointing; stool legs and chair legs connect to the load-bearing crossbeam via snap-fit connections to ensure the overall stability of the seat set. Stool legs and chair legs can be installed at any position on the structural beam. The bottom of the stool legs and chair legs is equipped with height-adjustable, non-scratch anti-slip rubber-plastic pads to prevent floor damage and easy movement by passengers, providing anti-slip and noise reduction, while also allowing floor level restoration.
Armrests/legs comply with GB/T 3325-2017 "General Technical Conditions for Metal Furniture" and QB/T 3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers of Light Industry Products - Neutral Salt Spray Test (NSS)" standards.

Keywords:

Classification:

Waiting Area