Waiting chairs (4 seats)

Model: VOUJD002 Specifications: 2370*650*860

Online Message 3D Showcase

电子邮件: 443050137@qq.com

Description

- Commodity name: Waiting chairs (4 seats)
Model: VOUJD002 Specifications: 2370*650*860

1. Material: ① Crossbeam: Aluminum alloy tubing.
② Seat surface, chair seat, chair back: 100% polyurethane (PU) material, integrally molded.
③ Armrests, chair legs, stool legs: Aluminum alloy.
2. Technical parameters: 1. Crossbeam: Testing standards comply with QB/T 3832-1999 "Evaluation of Corrosion Test Results for Metal Coatings on Light Industry Products" and QB/T 3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers on Light Industry Products - Neutral Salt Spray Test (NSS)" requirements: ① Uses high-strength premium aluminum alloy tubing sized 118mm*118mm with a wall thickness of 2.5mm; ② Metal parts have a neat coating on the tubing surface with no welding spots; ③ Metal coating has physical and chemical properties resistant to salt spray with no rust spots; ④ Metal surface corrosion resistance tested by continuous neutral salt spray for 580 hours, with both the coating's corrosion resistance grade and its protection level for the substrate reaching level 10.
2. Seat: Test results comply with GB/T 3325-2017 "General Technical Conditions for Metal Furniture", QB/T 1951.2-2013 "Metal Furniture Quality Inspection and Quality Evaluation", QB/T 4767-2014 "Steel Components for Furniture", QB/T 2904-2007 "Self-Skinning Rigid Polyurethane Foam", GB 8624-2012 "Classification of Combustion Performance for Building Materials and Products", GB/T 231.1-2018 "Metal Materials Brinell Hardness Test Part 1: Test Method", GB/T 228.1-2021 "Metal Materials Tensile Test Part 1: Room Temperature Test Method", and GB/T 10357.3-2013 "Furniture Mechanical Performance Test Part 3: Strength and Durability of Chairs and Stools" standards.
3. Structure and material of stool surface, chair seat, and chair back: Designed as an integrally molded one-piece structure (i.e., the seat and backrest are molded together in the same mold by pressure casting, without separate assembly or external cushions). It contains a high-strength steel frame welded into shape, overall molded with 100% polyurethane (PU) material. The entire seat is fully wrapped in PU, with a smooth front surface free of any uneven seams, easy to clean without special cleaners, simple and firm installation, and multiple seat color options available. The polyurethane PU (seat and backrest) test results comply with GB/T 32487-2016 "General Technical Conditions for Plastic Furniture", QB/T 4371-2012 "Evaluation of Antibacterial Performance of Furniture", and GB/T 31402-2015 "Test Methods for Antibacterial Performance of Plastic Surfaces" standards.
4. Armrests and chair legs, stool legs: All made from high-quality aluminum alloy die-casting, with surface treated by electrostatic powder coating. Each set of stool legs and chair legs is configured in quantity and specification to ensure seat stability and firmness; the structure uses single rod components without multi-rod assembly or any form of jointing; stool legs and chair legs connect to the load-bearing crossbeam via snap-fit connections to ensure the entire seat set's stability. Stool legs and chair legs can be installed at any position on the structural beam. The bottom of the stool and chair legs is equipped with height-adjustable, non-scratch anti-slip rubber-plastic pads to prevent floor damage and avoid easy movement by passengers, providing anti-slip and noise reduction while allowing floor level restoration.
Armrests/legs comply with GB/T 3325-2017 "General Technical Conditions for Metal Furniture" and QB/T 3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers on Light Industry Products - Neutral Salt Spray Test (NSS)" standards.

Keywords:

Classification:

Waiting Area