Waiting bench (3 seats)

Model: VOUJD005 Specifications: 1470*430*445

Online Message 3D Showcase

电子邮件: 443050137@qq.com

Description

- Commodity name: Waiting bench (3 seats)
Model: VOUJD005 Specifications: 1470*430*445

1. Material: ① Crossbeam: Aluminum alloy tubing.
② Stool surface, seat surface, backrest: 100% polyurethane (PU) material, integrally molded.
③ Armrests, chair legs, stool legs: Aluminum alloy.
2. Technical parameters: 1. Crossbeam: Testing standards comply with QB/T 3832-1999 "Evaluation of Corrosion Test Results for Metal Coatings on Light Industry Products" and QB/T 3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers on Light Industry Products - Neutral Salt Spray Test (NSS)" requirements: ① Using high-strength premium aluminum alloy tubing sized 118mm*118mm with a wall thickness of 2.5mm; ② Metal parts have a neat coating on the tubing surface with no welding points; ③ The metal coating has physical and chemical properties resistant to salt spray with no rust spots; ④ Metal surface corrosion resistance test with continuous neutral salt spray for 580 hours, the corrosion resistance rating of the coating itself and the protection level of the coating to the substrate both reach level 10.
2. Seat: Test results comply with GB/T 3325-2017 "General Technical Conditions for Metal Furniture", QB/T 1951.2-2013 "Metal Furniture Quality Inspection and Quality Evaluation", QB/T 4767-2014 "Steel Components for Furniture", QB/T 2904-2007 "Self-Skinning Rigid Polyurethane Foam", GB 8624-2012 "Classification of Combustion Performance for Building Materials and Products", GB/T 231.1-2018 "Metal Materials Brinell Hardness Test Part 1: Test Method", GB/T 228.1-2021 "Metal Materials Tensile Test Part 1: Room Temperature Test Method", GB/T 10357.3-2013 "Furniture Mechanical Performance Test Part 3: Strength and Durability of Chairs and Stools" standards.
3. Structure and material of stool surface, seat surface, and backrest: Designed as an integrally molded one-piece structure (i.e., the seat and backrest are molded together in the same mold by pressure casting, without using separate seat and backrest assembly or externally added seat and back cushions). Internally reinforced with a high-strength steel frame welded into shape, overall molded with 100% polyurethane (PU) material by compression molding. The entire seat is fully wrapped in PU, with a smooth front surface free of any uneven seams or gaps, easy to clean without special cleaning agents, simple and firm installation, and multiple seat surface color options available. Polyurethane PU (seat and backrest) test results comply with GB/T 32487-2016 "General Technical Conditions for Plastic Furniture", QB/T 4371-2012 "Evaluation of Antibacterial Performance of Furniture", and GB/T 31402-2015 "Test Methods for Antibacterial Performance of Plastic Surfaces" standards.
4. Armrests, chair legs, and stool legs: All made from high-quality aluminum alloy die-casting, with surface treated by electrostatic powder coating. The quantity and specifications of each set of stool legs and chair legs ensure the stability and sturdiness of the seat; single rod structure without multi-rod assembly or any form of jointing; stool legs and chair legs connect to the load-bearing crossbeam via snap-fit connections to ensure the overall stability of the seat set. Stool legs and chair legs can be installed at any position on the structural beam. The bottom of the stool legs and chair legs is equipped with height-adjustable, non-scratch anti-slip rubber-plastic pads to prevent floor damage and avoid easy movement by passengers, providing anti-slip and noise reduction, while also allowing floor level restoration.
Armrests/legs comply with GB/T 3325-2017 "General Technical Conditions for Metal Furniture" and QB/T 3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers on Light Industry Products - Neutral Salt Spray Test (NSS)" standards.

Keywords:

Classification:

Waiting Area